Material: Maple | Door Center: Raised Maple | Shelf Supports: Metal |
Door Frame (Stiles & Rails): 3/4" Thick Solid Maple | Sides (Wall/Base): 1/2" A-Grade Plywood with Wood Veneer/Stained Finish | Base Shelf: 1/2 Depth |
Wall: 5-Piece Raised Square | Top & Bottom (Wall): 1/2" A-Grade Plywood Wood Veneer | Face Frame: 3/4" x 1-1/2" Thick Maple Double-Dowel Joinery |
Base: 5-Piece Raised Square | Bottom (Base): 3/8" A-Grade Plywood with Wood Veneer | Drawer Box Sides: 1/2" Hardwood |
Cabinet Interior: Natural Maple UV Clear Coat | Style: Full Overlay 1/8" Side Reveal & 1/4" Top/Bottom Reveal, Butt Doors | Drawer Bottom: 1/2" Plywood |
Door Inner Profile: Slanted Bevel Inner Profile Works into Center Panel | Back Panel (Wall Cabinets): 1/2" Picture Frame Recess Style | Drawer Length: 18" |
Base Support: Steel Corner Supports | Hinges: Concealed, Six-Way Adjustable Soft-Close | Drawer Construction: Dovetail |
Exterior Finish: Stain | Connectors: Color Coated Metal Clip, Won't Tarnish | Drawer Finish: Natural UV Finish |
Shelves: 3/4" A-Grade Plywood with Wood Veneer | Drawer Glides: Undermount, Full Extension, Soft-Close | |
Toe Kick: Individual Base Cabinets come with 1/2" Plywood Finished Toe Kick | Toe Kick (Tip): When using two or more cabinets in a run you will need to order 96" Toe Kick Molding to run over the front & cover the seams between the cabinets where the individual toe board backer (toe kick) meets. | Finish: 2-Part Conversion Polyurethane that is Abrasion & Fade Resistant |
CARB2 COMPLIANT |
The pen accent on this style is considered to be more subtle and more consistent than some other hand applied accents. There are fewer noticeable variations than in some other accented styles. Black pen accent is applied by hand and variations are not considered defects.
No Center Stile On 24"- 42" Cabinets Unless Noted In Product
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. Two component catalyzed polyurethanes have several acronyms including 2-part, 2-component, 2-pack, 2-package, 2K urethane, and 2K-PU. To avoid confusion with other 2 part coatings like epoxy, it’s wise to include the “PU” when using the acronym.
The properties that make 2K-PU a top choice include the following:
CARB2 is a certification process instituted by the California Air Resources Board (CARB) to reduce formaldehyde emissions and protect the public from airborne toxic contaminants. ... The CARB2 compliant seal indicates that the product's formaldehyde levels are well within the safety limits.
Easy to assemble with a pre-installed locking plate & clip system. You'll need a phillips head screwdriver either power (recommended) or manual, wood glue and a rubber mallet. These can also be assembled with glue, corrugated fastener/brad nailer, staple gun & rubber mallet.
ASSEMBLY VIDEOS FOR THIS STYLE ARE IN THE TOP SECTION
CLICK TO CUSTOMIZE