Questions? 1-888-711-0171

Oxford White Shaker Bath Cabinets

Material: Birch & MDF	Style: Full Overlay, Butt Doors	Wall & Base: 5-Piece Recess Square
Face Frame: 3/4" Thick Solid Birch	Door Frame: 3" X 3/4" MDF	Door Center: Recessed MDF
Sides (Wall/Base): 1/2" A-Grade Plywood with Wood Veneer/Stained Finish	Top & Bottom (Wall): 1/2" A-Grade Plywood/Wood Veneer	Bottom (Base): 3/8" A-Grade Plywood with Wood Veneer
Cabinet Interior: Matches Door Color	Back Panel (Wall Cabinets): 1/2" Picture Frame Recess Style	Back Panel (Base Cabinets): 1/2" Picture Frame Recess Style
Hinges: Concealed, Six-Way Adjustable Soft-Close	Connectors: Pre-Installed, Color Coated Metal Clip, Won't Tarnish	Shelves: 3/4" A-Grade Plywood with Wood Veneer
Base Shelf: 1/2 Depth	Shelf Supports: Metal	Drawer Box Sides: 17mm (close to 3/4" hardwood)
Drawer Bottom: 3/8" Plywood	Drawer Length: 18"	Drawer Construction: Dovetail
Drawer Finish: Natural UV Finish	Drawer Glides: Undermount, Full Extension, Soft-Close	Base Support: Wood Corner Brackets with Wood I-Beam
Toe Kick: Individual Base Cabinets come with 1/2" Plywood Finished Toe Kick	Toe Kick (Tip): When using two or more cabinets in a run you will need to order 96" toe kick molding to run over the front & cover the seams between cabinets where the individual toe board backer (toe kick) meets.	Finish: Sherwin Williams UV Waterborne Finish

EPA TSCA TITLE VI COMPLIANT

No Center Stile On 24"-36" Cabinets Unless Noted In Product

Full-overlay door styles leave roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

The GREENGUARD Certification mark communicates that representative samples of a product have undergone rigorous scientific testing to meet some of the world’s most stringent chemical emissions requirements.This certification helps reduce indoor air pollution and the potential for airborne chemical exposure.
This cabinetry product meets the United States Environmental Protection Agency (EPA)’s current standards for compliance with TSCA Title VI. Labeling indicating compliance is on each box and product. EPA’s TSCA Title VI, the Formaldehyde Standards for Composite Wood Products Act, establishes the world’s most stringent formaldehyde emissions standards for composite wood products. For more information, please feel free to visit www.epa.gov.
This goes even further than CARB2 Compliance to help manage emissions.
Easy to assemble with a pre-installed locking plate & clip system. You'll need a phillips head screwdriver either power (recommended) or manual, wood glue and a rubber mallet. These can also be assembled with glue, corrugated fastener/brad nailer, staple gun & rubber mallet.
Click to Order Cabinet Door Sample

• TAX RETURN SUPER SALE ENDS IN 3 DAYS! •