FREE US 48 SHIPPING ON READY TO ASSEMBLE ONLY NET ORDERS OF $3,000 OR MORE       |        FINANCING AVAILABLE

Espresso Glaze

Espresso Glaze RTA Cabinets

Recessed Drawer, Raised Door

FEATURES

  • Cabinets Come Pre-Assembled 
  • Full Overlay Door Style - 3/4" Solid Birch Face-Frame
  • 5-Piece Raised Panel Birch Door 
  • 5-Piece Recessed Panel Drawer 
  • Solid Birch Stiles & Rails
  • ACCENT GLAZE: Licorice Accent In Bevels Of Stiles & Rails
  • Birch Veneer Center Panel
  • 1/2" A-Grade Plywood Cabinet Box
  • 3/4" A-Grade Plywood Shelves
  • Matching Cabinet Interior
  • Finished Matching Sides
  • Hardwood 5/8"  UV Coated Dovetail Drawer Box Sides With 1/2" Plywood Bottom
  • Full Extension, Soft Close Undermount Drawer Glides
  • Six-Way Adjustable Fully Concealed Soft Close Door Hinges
  • Wood Corner Bracket
  • Features Sherwin Williams Waterborne Finish
  • EPA TSCA TITLE VI Compliant
  • Ships In 7-12 Business Days*



SPECS

MATERIAL:  Birch 

STYLE: Full Overlay, Butt Doors

WALL: 5-Piece Raised Panel Door

BASE: 5-Piece Recess Square Drawer Front With Raised Panel Door

FACE FRAME: 3/4" Thick Solid Birch

DOOR FRAME: 3/4" Birch

DOOR CENTER: Raised Birch Veneer

DRAWER CENTER: Recessed Birch Veneer

SIDES (WALL/BASE): 1/2" A-Grade Plywood With Wood Veneer/Stained Finish

TOP & BOTTOM (WALL): 1/2" A-Grade Plywood/Wood Veneer

BOTTOM (BASE): 3/8" A-Grade Plywood With Wood Veneer

CABINET INTERIOR: Matches Door Color

BACK PANEL: 

  • Wall Cabinets: 1/2" Picture Frame Recess Style
  • Base Cabinets: 1/2" Picture Frame Recess Style
HINGES: Concealed, Six-Way Adjustable Soft-Close

CONNECTORS: Pre-Installed, Color Coated  Metal Clip, Won't Tarnish

SHELVES: 3/4" A-Grade Plywood With Wood Veneer

BASE SHELF: 1/2 Depth

SHELF SUPPORTS: Metal

DRAWER BOX SIDES: 5/8" Hardwood

DRAWER BOTTOM: 1/2" Plywood

DRAWER LENGTH: 21"

DRAWER CONSTRUCTION: Dovetail

DRAWER FINISH: Natural UV Finish

DRAWER GLIDES: Undermount, Full Extension, Soft-Close

BASE SUPPORT: Wood Corner Brackets

TOE KICK: 

  • Individual Base Cabinets Com With 1/2" Plywood Finished Toe Kick

  1. When using two or more cabinets in a run you will need to order 96" toe kick molding to run over the front & cover the seams between the cabinets where the individual toe board backer (toe kick) meets.

FINISH: Sherwin Williams UV Waterborne Finish

EPA TSCA TITLE VI COMPLIANT

No Center Stile On 24"-36" Cabinets Unless Noted In Product

  • Full-overlay door styles leave roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.
  • The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
  • Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
  • Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.


ASSEMBLY

When ordering these Pre-Assembled they will ship already put together. Technicians will use the cabinet assembly system to assemble the cabinets for you so when they arrive you will just need to install them. As with any installation you may need to adjust the hinges and glides once the installation is complete.

EPA TSCA TITLE VI COMPLIANT

EPA TSCA TITLE VI COMPLIANT

This cabinetry product meets the United States Environmental Protection Agency (EPA)’s current standards for compliance with TSCA Title VI.  Labeling indicating compliance is on each box and product.  EPA’s TSCA Title VI, the Formaldehyde Standards for Composite Wood Products Act, establishes the world’s most stringent formaldehyde emissions standards for composite wood products.  For more information, please feel free to  visit www.epa.gov.

This goes even further than CARB2 Compliance to help manage emissions.

1 - 48 of 162

Page:
  1. 1
  2. 2
  3. 3
  4. 4

1 - 48 of 162

Page:
  1. 1
  2. 2
  3. 3
  4. 4