|Material: Birch & Maple||Style: Full Overlay, Butt Doors||Wall & Base: 5-Piece Recess Square|
|Face Frame: 3/4" Thick Recess Square||Door Frame: 3/4" Birch||Door Center: Maple Veneer|
|Sides (Wall/Base): 1/2" A-Grade Plywood with Wood Veneer/Stained Finish||Top & Bottom (Wall): 1/2" A-Grade Plywood/Wood Veneer||Bottom (Base): 3/8" A-Grade Plywood with Wood Veneer|
|Cabinet Interior: Matches Door Color||Back Panel (Wall Cabinets): 1/2" Picture Frame Recess Style||Back Panel (Base Cabinets): 1/2" Full Back|
|Hinges: Concealed, Six-Way Adjustable Soft-Close||Connectors: Pre-Installed, Color Coated Metal Clip, Won't Tarnish||Shelves: 3/4" A-Grade Plywood with Wood Veneer|
|Base Shelf: 1/2 Depth||Shelf Supports: Metal||Drawer Box Sides: 17mm (close to 3/4" hardwood)|
|Drawer Bottom: 1/2" Plywood||Drawer Length: 21"||Drawer Construction: Dovetail|
|Drawer Finish: Natural UV Finish||Drawer Glides: Undermount, Full Extension, Soft-Close||Base Support: Wood Corner Brackets with Wood I-Beam|
|Toe Kick: Individual Base Cabinets come with 1/2" Plywood Finished Toe Kick||Toe Kick (Tip): When using two or more cabinets in a run you will need to order 96" toe kick molding to run over the front & cover the seams between cabinets where the individual toe board backer (toe kick) meets.||Finish: Sherwin Williams Finish|
EPA TSCA TITLE VI COMPLIANT
No Center Stile On 24"-36" Cabinets Unless Noted In Product
This cabinetry product meets the United States Environmental Protection Agency (EPA)’s current standards for compliance with TSCA Title VI. Labeling indicating compliance is on each box and product. EPA’s TSCA Title VI, the Formaldehyde Standards for Composite Wood Products Act, establishes the world’s most stringent formaldehyde emissions standards for composite wood products. For more information, please feel free to visit www.epa.gov.
This goes even further than CARB2 Compliance to help manage emissions.
Easy to assemble with a pre-installed locking plate & clip system. You'll need a phillips head screwdriver either power (recommended) or manual, wood glue and a rubber mallet. These can also be assembled with glue, corrugated fastener/brad nailer, staple gun & rubber mallet.