Material: Birch & MDF | Style: Full Overlay, Butt Doors | Wall & Base: 5-Piece Recess Square |
Face Frame: 1-1/2" X 3/4" Thick Solid Birch | Door Frame: Birch | Door Center: Recessed Birch Veneer over MDF |
Sides (Wall/Base): 1/2" A-Grade Plywood with Wood Veneer/Stained Finish | Top & Bottom (Wall): 1/2" A-Grade Plywood/Wood Veneer | Bottom (Base): 3/8" A-Grade Plywood with Wood Veneer |
Cabinet Interior: Natural UV Coated Maple Veneer | Back Panel (Wall Cabinets): 1/2" Full Plywood Back | Back Panel (Base Cabinets): 1/2" Full Plywood Back |
Hinges: Concealed, Six-Way Adjustable Soft-Close | Dovetail Routing For Easy Assembly | Shelves: 3/4" A-Grade Plywood with Wood Veneer |
Base Shelf: 10" Depth | Shelf Supports: Heavy Duty Plastic | Drawer Box Sides: 1/2" Hardwood |
Drawer Bottom: 3/8" Plywood | Drawer Length: 21" | Drawer Construction: Dovetail |
Drawer Finish: Natural UV Finish | Drawer Glides: Undermount, Full Extension, Soft-Close | Base Support: Heavy Duty Plastic Corner Brackets |
Toe Kick: Individual Base Cabinets come with 1/2" Plywood Finished Toe Kick | Toe Kick (Tip): When using two or more cabinets in a run you will need to order 96" toe kick molding to run over the front & cover the seams between cabinets where the individual toe board backer (toe kick) meets. | Finish: Sherwin Williams |
EPA TSCA TITLE VI COMPLIANT
No Center Stile On 24"-36" Cabinets Unless Noted In Product
This cabinetry product meets the United States Environmental Protection Agency (EPA)’s current standards for compliance with TSCA Title VI. Labeling indicating compliance is on each box and product. EPA’s TSCA Title VI, the Formaldehyde Standards for Composite Wood Products Act, establishes the world’s most stringent formaldehyde emissions standards for composite wood products. For more information, please feel free to visit www.epa.gov.
This goes even further than CARB2 Compliance to help manage emissions.
This is a ready to build cabinet style and you will need power tools to assemble them. While the parts are all dadoed and you'll receive all the screws, glides, hinges and corner supports (corner supports and glides are for base cabinets only) for cabinets, you will not receive L-brackets to attach the face frame to the side/top/bottom panels.
These are also available pre-built under our pre-assembled section if you prefer not to do your own assembly.
We use:
Spotnails 18-gauge corrugated fastener model# X1C1008 with 1/2" fasteners used to attach side, top and bottom panels to the face frame.
18-gauge narrow crown staple gun with 1" 18-gauge crown staples to attach the back panel to the top, bottom and side panels.
Drill, wood glue and a rubber mallet for assembling the drawer boxes.
This list is a recommendation based on what we use, however, if you have other tools or prefer to source L-brackets on your own you can assemble the cabinets per your preference. Please note that damage, modifications, or errors during assembly are not covered by warranty.
WoodCabinets4Less is not responsible for any injury or damage as a result of cabinet assembly or use of your tools. Always put safety first, wear safety glasses and keep your hands away form any area you're firing a fastener into.
CLICK TO CUSTOMIZE