- Menu
- Search
- Cart
Visit Us By Appointment In Spring Green, WI
Verona Stone Mist RTA Kitchen Cabinets - SAVE 55% ENDS JULY 15TH
- Features
- Specs
- About
- EPA TSCA TITLE VI Compliant
- Assembly
- Gallery
- Order Cabinet Door Sample
- Full Overlay Door Style 1-3/4" X 3/4" Kiln Dried Solid Birch Face-Frame
- 5-Piece Birch Door Frame With Birch Veneer Center Panel
- Mortise & Tenon Door/Drawer Front Joinery
- 1/2" A-Grade Plywood Cabinet Box
- 3/4" A-Grade Plywood Shelves
- Natural Wood Veneer UV Coated Cabinet Interior
- Finished Matching Sides
- Hardwood UV Coated Dovetail Drawer Box
- Full Extension, Soft Close Undermount Drawer Glides
- Six-Way Adjustable Fully Concealed Soft Close Door Hinges
- Heavy Duty Plastic Base Corner Support
- EPA TSCA TITLE VI Compliant
- Ships In 7-12 Business Days*
Material: Birch Style: Full Overlay, Butt Doors Wall & Base: 5-Piece Recess Square Face Frame: 1-3/4" X 3/4" Thick Solid Birch Door Frame: Birch Door Center: Recessed Birch Veneer over MDF Sides (Wall/Base): 1/2" A-Grade Plywood with Wood Veneer/Stained Finish Top & Bottom (Wall): 1/2" A-Grade Plywood/Wood Veneer Bottom (Base): 3/8" A-Grade Plywood with Wood Veneer Cabinet Interior: Natural UV Coated Maple Veneer Back Panel (Wall Cabinets): 1/2" Full Plywood Back Back Panel (Base Cabinets): 1/2" Full Plywood Back Hinges: Concealed, Six-Way Adjustable Soft-Close Routed For Easy Assembly With Included L-Brackets Shelves: 3/4" A-Grade Plywood with Clear UV Protective Coating Base Shelf: 10" Depth Shelf Supports: Heavy Duty Plastic Drawer Box Sides: 5/8" Hardwood Drawer Bottom: 3/8" Plywood Drawer Length: 21" Drawer Construction: Dovetail Drawer Finish: Natural UV Finish Drawer Glides: Undermount, Full Extension, Soft-Close Base Support: Wood Corner Brackets Toe Kick: Individual Base Cabinets come with 1/2" Plywood Finished Toe Kick Toe Kick (Tip): When using two or more cabinets in a run you will need to order 96" toe kick molding to run over the front & cover the seams between cabinets where the individual toe board backer (toe kick) meets. Finish: Sherwin Williams EPA TSCA TITLE VI COMPLIANT
No Center Stile On 24"-36" Cabinets Unless Noted In Product
- Mortise & tenon door/drawer joinery is a superior way of joining rails and stiles to prevent hairline cracking and joint separation.
- Full-overlay door styles leave roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.
- The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
- Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
- Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.
- Stone MIst is a recessed style with opaque gray stain a warm stone mist brushed glazing over it. The effect is a beautiful shade of stone mist over a birch that brings out the beautiful wood grain but doesn't look rustic. The inner profile slant of the door brings timeless style and quality. *You do not see the glazing as showdows or accent in bevels but; is part of the finish of the door that makes it look like a true stain finish.
- Back: Full ½” plywood back, affixes with routing. Screws that attach the back panel to the cabinet floor on base cabinets and to the top and bottom of wall cabinets give added strength and stbility to the cabinet.
- Side Panels: ½” plywood sides. Light birch veneer interior and matching finished exterior.
- Frame: ¾” thick, 1-3/4” wide, kiln-dried solid hardwood. Frame and sides are installed with route and L-Bracket system, which ensures easy assembly and strength.
- Hinges: Heavy duty steel concealed hinge, adjustable with soft-close mechanism.
- Drawer Glides: Heavy duty rated to 75 pounds are full-extension undermount with soft-close.
- Shelves: ¾ thick front edgebanded plywood; fully adjustable with clear UV coating finish.
- Toe Kick: 4½“ high toe kick area.
This cabinetry product meets the United States Environmental Protection Agency (EPA)’s current standards for compliance with TSCA Title VI. Labeling indicating compliance is on each box and product. EPA’s TSCA Title VI, the Formaldehyde Standards for Composite Wood Products Act, establishes the world’s most stringent formaldehyde emissions standards for composite wood products. For more information, please feel free to visit www.epa.gov.
This goes even further than CARB2 Compliance to help manage emissions.
Easy to assemble with l-brackets and routed dado system. You'll need a phillips head screwdriver either power (recommended) or manual, wood glue and a rubber mallet. These can also be assembled with glue, corrugated fastener/brad nailer, staple gun & rubber mallet.
Filters
- Base Cabinets
-
- Standard Base Cabinets 10
- Corner Base Cabinets 6
- Full Height Door Base Cabinets 10
- Sink Base Cabinets 5
- Farm Sink Base Cabinets 1
- 2 Drawer Base Cabinets 3
- 3 Drawer Base Cabinets 7
- Base Cabinets With 1 Roll Out Tray 14
- Base Cabinets With 2 Roll Out Trays 14
- Base Cabinets With 3 Roll Out Trays 7
- Spice Base Cabinets 1
- Trash Base Cabinets 6
- Tray Base Cabinets 6
- Microwave Base Cabinets 1
- Bathroom Cabinets
- Cabinet Accessories
- Office Cabinets
- Specialty Wall Cabinets
- Tall Cabinets
- Moldings
- Fillers
- Finished Panels
- Decorative Accents
