Shaker Cognac Kitchen Cabinetry

CARB2 COMPLIANT

No Center Stile On 24"-36" Cabinets Unless Noted In Product

• 3/4'' thick X 3" wide rails and stiles on doors with drawer headers having adjusted rail and or stile sizes.
• This hardwood may have variegated grain which is not considered a defect. Some pieces may have more active graining than others. This is a characteristic of natural maple wood and not considered a defect.
• Skins for exposed sides may be either MDF with red  birch veneer or plywood with maple or red birch veneer. Manufacturing processes will determine this based upon materials available and in an effort to keep costs down for customers.
• Full-overlay door styles leave roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.
• The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
• Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
• Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.
• Manufacturers reserve the right to change specifications at any time with or without notice.