Width 48"
Height 96"
Thickness 1/4"
If ordering this item alone there will be an additional 200.00 shipping fee invoiced separately. It has to go on a pallet one a semi-truck.
Stained plywood bead board panel finished on one side. Edges are not finished. This panel is often used as a back panel for an island or peninsula. It's trimmable so it can also be cut to use for many other finishing needs. Due to potential shipping damage on the edges of these types of panels, please note that they sometimes deliver with damage to the outer 2-3" on the edges and will need to be trimmed to remove that damage. This item will not be replaced unless damage is more than 3" from either edge.
CLICK TO CUSTOMIZE